This is the place I'll list or otherwise feature any new parts I've had to buy

I won't include any parts that are replacement donor parts, e.g. brake discs (rotors) or wheel bearings. It will be just parts that are required because the donor parts aren't suitable, or they can't be easily or economically made. 

  Front coilovers, 13.125" ctrs., 7/16" eyes, 3.625" stroke, 200#/in spring rate.

Got these at a good price and will suffice for the initial build and test phase, while I save for some Aldans or similar. For some reason the photo makes the bottom one look bent. It isn't.

  Top front ball joint, MOOG K3082 

  Tilton balance bar assembly #72-250

The center tube piece gets welded into your own pedal, and reamed out after if required.

Rod end. I used 10 from McMaster Carr #6072K66

  Lights from http://www.susquehanna.com/susq/new.htm Two low beam two high beam. Very good quality and service.